How to Prevent Relaxation of Agricultural Chain


The tightness of the agricultural chain should be appro […]

The tightness of the agricultural chain should be appropriate. If it is too tight, power consumption will be added, and bearings will be easy to wear. If it is too loose, the agricultural chain will easily jump and break. The tightness level of the agricultural chain is: lifting or pressing from the middle of the agricultural chain, the center distance between the two sprockets is about 2%-3%. The new agricultural chain is too long or stretched after application, which is difficult to adjust. The chain links can be removed depending on the situation, but it is necessary to have even numbers. The chain link should pass through the back of the agricultural chain, the locking piece should be inserted outside, and the opening of the locking piece should face the opposite direction of rotation.

After the chain wheel of the agricultural chain is severely worn, the new chain wheel and the new chain should be changed together to ensure excellent meshing. You can't just change a new agricultural chain or a new sprocket. Otherwise, it will cause poor meshing and accelerate the wear of new chains or sprockets. When the sprocket tooth surface is worn to a certain level, it should be turned over in time to extend the operation time.

In order to prevent the relaxation of the agricultural chain, we should first guard against the abrasion and disconnection of the agricultural chain, which requires us to improve the severity of the agricultural chain. In order to reduce the wear and tightness of the chain, we can purchase agricultural chains with better quality, which can improve the processing precision of gears and the hardness of the working surface. Together, when we set up the chain, we should parallel the chain shaft and correct it, which can effectively reduce the wear of the chain, otherwise, it will reduce the violation of the chain and the chain shaft and further aggravate the wear of the agricultural chain.