Today we will explain to you some knowledge about removing stains. In view of this knowledge, we should understand that palm oil chain have been used for a long time, and the surface is prone to carbon deposition and oil stains. How can they be easily removed?

If there is a carbon deposit on the palm oil chain, chemical and mechanical methods can be used to remove it without damaging the palm oil chain. In the former, palm oil chain are directly immersed in the prepared chemical solution, and the parts are taken out after the carbon deposit softens and loosens, erased with a brush or cotton thread, and then washed with hot water. The latter is to remove carbon deposit with tools such as metal brush and shovel knife. Although it is simple, it is difficult to completely remove the carbon deposit.

If the palm oil chain is contaminated with oil instead of carbon deposit, organic solvent and alkaline solution can remove it, so that the palm oil chain can restore a smooth and new surface and good service performance.

It is well known that our palm oil chain is composed of many connecting pieces. In use, we found that the damage of many palm oil chain is caused by the fracture near the holes of the connecting pieces, and there is a precursor before the fracture: micro cracks are generated around the holes until the fracture. This phenomenon is called fatigue damage.

The fundamental solution is to reduce the load or replace the palm oil chain with large bearing capacity, especially starting from the moment the crack is found. After all, the crack develops very fast and must be paid attention to.