How to Replace The Old Chain With The New Agricultural Chain


The agricultural chain needs to be updated after it is […]

The agricultural chain needs to be updated after it is damaged due to improper use or the end of its service life. What should be done when using the new agricultural chain to update the old chain? The following are the reference replacement steps we provide for you.

If any fixing device connecting two or more agricultural chains is removed, e.g. slats, lining tiles, hoppers, etc. (unless there is sufficient space between the chains). Then, disconnect the chain at the tension end by removing the outer link or connecting link (as required).

Next, a new chain with a manageable length can be fixed to the old chain with the original connecting link (if possible). Attention should be paid to ensuring that the method of the agricultural chain is correct. The new fixing device should be connected to the new chain or the old fixing device should be reconnected to ensure that the agricultural chain passes through the center.

Next, the transmission device can be used to make the new agricultural chain gradually run-up and the old chain gradually fall down.

When the new agricultural chain has been sent to the conveyor, the next easy-to-handle length can be connected, this time using a new connecting link. At the same time, the old chain can be disconnected from the lower strand. Repeat until all chains have been replaced.

In this way, the new agricultural chain will be replaced, and the new agricultural chain can be used to work normally. Here, we should remind everyone not to use the new and old connection. It is better to replace all the new ones if you want to replace them, so as to save trouble in the future.