In the long-term use of industrial conveyor chain, wear may occur due to some reasons. Why wear and tear, and what methods are available to prevent wear and tear, and corresponding solutions are provided to everyone.

First point:

The wear of the industrial conveyor chain makes the chain ineffective. The main reasons are the poor material of the industrial conveyor chain and the improper operation of the workers. The most easily worn parts of the chain as a whole are sprocket and pin shaft. The wear of these two parts is mainly due to insufficient local lubrication, so in order to avoid this phenomenon, operators should pay attention to check the lubrication effect frequently, add lubricating oil in time, check whether there is abrasive in the lubricating oil or change the lubrication method. After the sprocket is slightly worn, the sprocket can be reversed so that the less worn side faces the chain.

Second point:

If the use environment is harsh or the lubrication and sealing are poor, the hinge will be worn. Once the chain hinge is worn, the chain links will become longer, which will easily cause tooth jump or chain release during operation, reduce the service life of the chain and accelerate the failure of the chain. The solution is naturally a good user environment. If the environment cannot be changed, it can be solved through maintenance.

In the use of industrial conveyor chain, wear will occur. Remember that the conveyor chain cannot be overloaded, i.e. too many heavy objects should be let go so that the industrial conveyor chain can be used within a reasonable range. Only in this way can the wear problem be prevented and the industrial conveyor chain be better protected.