In order to link the leaf chain in place, the following summarizes the standard link methods about the leaf chain, hoping to be useful to everyone.

Firstly, the two ends of the leaf chain are respectively hung on the active sprocket and the passive sprocket. Then take out the hemp rope, pass one end of the rope head through the second link of the chain from bottom to top, and tie it with the head pressing rope. At the same time, prepare pin shaft, chain piece, split pin and all hand tools, and take the other rope end of hemp rope to pass through the second chain link at the other end of the same chain from bottom to top.

Next is a third link that bypasses the link from top to bottom and passes through the end of the twine. The twine bypasses the link and then passes through the third link at the other end from bottom to top and then connects the two ends of the leaf chain in series. Attention should be paid to the fact that it is not appropriate to wear too many ropes. Generally, three ropes are enough, otherwise, it is easy to make chain connectors difficult.

It is also necessary to snap the chain taking and connecting device at the two ends of the leaf chain and adjust the adjusting screw of the chain connecting device so as to make the chain links at the two ends of the leaf chain butt together. As long as the hemp rope is tightened by force, the two ends of the leaf chain can be butted together; Then take the leaf chain pin shaft and insert it into the sleeves of the two chain links at both ends of the chain, align the inner link of the chain and align the links in the other row, then drive the leaf chain pin shaft into the inner link and sleeve evenly with a hammer, install the outer link and put on the split pin, and the whole linking process is completed.